Showroom: 101 W Quitman * PO Box
220 * Alba, TX 75410 Toll Free 1.888.263.8969
Travel:
24" X-Axis Longitudinal
24" Y-Axis Cross Table
24" Z-Axis Vertical Head
Table:
30" x 20" Working Surface
5-0.71" on 3.94" Centers T-Slots
3000 Lbs. Loaded With-Uniform Distribution
Rapid Traverse:
1181 IPM X-Axis Rate
1181 IPM Y-Axis Rate
787 IPM Z-Axis Rate
Spindle Nose to Table:
Max. 30", Min. 6" Z-Axis Clearance
Equipped With:
Automatic Lube System
Full Enclosure
Flood Coolant System
Wash Down and Chip Auger
Positioning Accuracy:
.0002" Positioning (Full Stroke Using VDI3441 Std)
.0001" Repeatability (Full Stroke Using VDI3441 Std)
Spindle Head:
0-10,000 RPM Spindle; Through a Single Belt Drive
#40 V-Flange Spindle
12.5 HP (9.5 KW) @ 1 Min Rating
10 HP (7.5 KW) @ 30 Min Rating
Torque: 131 ft-lbs (177 NM) at 800 RPM (1 Min Rating), 105 ft-lbs at 30 Min
Rating
Rigid Tapping
Tool Changer:
24-Station Automatic Tool Changer; Swing Arm, Random Access, Computerized,
Random Pot.
Maximum Tool Diameter: 3.2"/With Adj Pot Empty 4.72"
Maximum Tool Length: 11.8"
Maximum Tool Weight: 15 Lbs.
Maximum Carousel Weight: 180 Lbs.
Tool Change Time: 3 Seconds Tool to Tool, Adjacent
Standard Features Include:
Ultimax Dual Screen Conversational/Graphics Control with G Code Programming
Capabilities
RS232 Port
Full Enclosures
All Available Manuals
Please note: Specifications and Year Model are correct to the best of
Preferred Machine Tools knowledge and are subject to verification and correction
by the purchaser.
Preferred Machine Tools
